Search Results

Purpose This page acts as a tutorial for performing high quality composite hand layups with vacuum bag use. Many factors are to be considered in the setup and performance of a composite hand layup. Due to the timely nature of epoxy resin working/curing times ...

The following document serves as a guide to using the U.S. Solid USS-BSW00005 Battery Spot Welder to spot weld nickel strips to cells. Although this SOP is written for this specific model, the information can also apply as general spot-welding guidelines for...

The following document is for setting up a file for Water jetting (WJ) at MAE C. Jeff's Lab To send a file to be WJ you could also go through Jeff Bielling (the HWLEE Lab) by following these instructions: Waterjet Software Instructions.docx.  MAE C The...

EA 9340 Guidelines For Adhering Skins to Core Roughly 250g glue (not hardener) per 24 sqft of area is the minimum More may be required if the skins have wrinkles in them Weight is applied via rigid panel and physical weights (i.e. thick plywood + buckets...

Overview This article serves to document our manufacturing processes and decision making behind the aerobody for Flare. Materials A significant array of materials were required for the manufacturing of Flare's aerobody. Important materials are listed below ...

Lay the groundwork for the manufacturing year for Car 5